ZERO-TEAM Paintballs This is a batch of Tomahawk ZERO paintballs that are significantly more fragile than normal. In drop tests, the ball achieves a 10/10 fragility rating, making it the ideal training ball for tournament players. Unfortunately, the manufacturing process sometimes causes drops to form in the bags, so the paint may need to be cleaned with a simple paper towel before it goes into the hopper. Both characteristics are part of the product and therefore cannot be returned. Scope of delivery: one box with 4 bags of 500 paintballs each General note on paintballs: Paintballs are a living, breathing product, like fruit in the fresh produce section of the supermarket. When selected and handled correctly, they are a lot of fun, but if handled incorrectly, problems can arise. -    Paintballs should be stored at +15°C to +25°C in a dry place, protected from direct sunlight. -    The gelatine shell attracts moisture, causing paintballs to swell, soften and become larger: therefore, always seal the bags well. This rule also applies during a game day on the field. -    Gelatine becomes brittle and more fragile in cold temperatures (below +10°C). -    Gelatine becomes soft and less brittle in heat (above +30°C). Paintballs that are 'too brittle' should therefore be carefully warmed up, and paintballs that are 'too hard' should be cooled down slightly in a controlled manner in order to influence their properties as desired. Application example: It is a cold spring morning, the outside temperature is below +5°C, and the paintballs are bursting in the barrel. Warm up the bags in a warm car and shoot them before they cool down. This will significantly reduce the problems. Alternatively, buy a paintball with a winter formula or a specific winter paint. Buying paintballs is like buying fruit, vegetables or meat - it's a matter of trust, as you can rarely tell the true properties of paintballs from the outside. Strict quality controls, safe transport and good needs assessment are therefore important to ensure you are happy with the product. The most expensive paintball is always the one that doesn't work!  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball markerTwo-Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation.Faster Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal.Improved efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase)Twist-Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move.Ultra-gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech.Tool Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size.Improved Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter.New curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field.Slimline Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built.Compact QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.  

The Luxe® TM40 is packed with the latest and greatest technology and is dedicated to professional paintball player Tim Montressor.Besides all of the aesthetic updates, the new Luxe® has updated TM40 upgrade Core. The bolt chamber has an increased internal volume which gives the Luxe® TM40 a lower operating pressure and more shots than any previous edition Luxe®. The open face bolt design gives the TM40 a super soft shot while the ICE PLATING gives the bolt low resistance friction.In addition, the back end of the bolt has a higher flow orifice which also reduces the operating PSI of the gun while improving the reaction speed. The spool of the bolt on the TM40 has also been redesigned to offer greater flow and response. The TM40 will be available in both an electric and mechanical version and has an integrated QEV installed to maximize mechanical performance.Tim provided feedback and drove product development at DLX Technology. He was instrumental in guiding the Luxe® marker brand to the top of the industry and the podium. This marker is the last Luxe® that will have the benefit of his guidance and input, we are proud that it will carry his legacy and the TM40 moniker.AestheticsThe Luxe® TM40 is the physical definition of the Luxe® brand, clean and minimalistic yet instantly recognizable. It looks like a Luxe®, and that is a good thing because the Luxe® is the best-looking marker in paintball.ErgonomicsLuxe® ergonomics have set the industry standard since the Luxe® was introduced, and has always been based upon feedback from the top players in our sport. By adapting to playing style changes, tank, loader configurations, and trigger preferences DLX has further optimized the handling characteristics of the Luxe® TM40. Ergonomic changes to the trigger-frame, foregrip, and other contact surfaces make the Luxe® TM40 the most comfortable Luxe® we have ever produced.Refined PerformanceThe previous generation Luxe® won a World Cup in its debut year in the hands of Houston Heat. Building on that success, we strove to refine the Luxe® drivetrain to deliver even greater performance. Nearly every component of the core has been altered and redesigned to improve efficiency, shot quality, and ball handling.VersatilityWith a mechanically optimized core, the Luxe® TM40 goes where no Luxe® has gone before - mechanical. Featuring an industry-first tool-less mechanical conversion, the TM40 is ready to compete and win in nearly any competitive paintball genre.  

"Tri-Fade France" anodizing on a refurbished Shocker® ERA The product price consists of the regular Shocker ERA price plus the anodizing "Tri-Fade France" which will not happen again. An absolute unique piece We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

B merchandise The marker has a small defect crack at the back of the grip frame, see pictures THE DLX PAINTBALL MARKERDLX has established the past years impressive paintball markers firmly on the market. One of these models is the Luxe 2.0 ICE, an impressive development of the popular LUXE 1.0, 1.5 and 2.0. The Luxe ICE has a new OLED board. The interface language control has also been completely redesigned. The new voices are the voices of well-known football nationals.The DLX Luxe ICE paintball marker is equipped with a Bolt Return Spring as standard and has an easy-to-maintain Fire Chamber. Furthermore, the Feather Touch Soft-Bolt has various adjustment options. In addition, the Luxe ICE has a Quick Latch Detens system integrated. This marker clearly shows that DLX places emphasis on quality.DLX PAINTBALL MARKER - THE MANUFACTURER PROVIDES QUALITYLike many other paintball guns from DLX, this marker has also integrated the new DLX Luxe ICE board. The Luxe ICE circuit board is based on embedded controller technology, making the marker much more efficient and responsive. Thanks to an energy-saving mode, the battery of the DLX Paintball Marker is much longer than you would expect from other paintball guns. Of course, the separate voltage regulator for digital and analog circuitry also has a positive influence on the energy consumption of the DXL marker due to the power-on performance.  

"CK Muerte" Advanced Lasering with barrel on a new Shocker® ERA The product price consists of the regular Shocker ERA price plus the CK Advanced Lasering with barrel. We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The Luxe® TM40 is packed with the latest and greatest technology and is dedicated to professional paintball player Tim Montressor.Besides all of the aesthetic updates, the new Luxe® has updated TM40 upgrade Core. The bolt chamber has an increased internal volume which gives the Luxe® TM40 a lower operating pressure and more shots than any previous edition Luxe®. The open face bolt design gives the TM40 a super soft shot while the ICE PLATING gives the bolt low resistance friction.In addition, the back end of the bolt has a higher flow orifice which also reduces the operating PSI of the gun while improving the reaction speed. The spool of the bolt on the TM40 has also been redesigned to offer greater flow and response. The TM40 will be available in both an electric and mechanical version and has an integrated QEV installed to maximize mechanical performance.Tim provided feedback and drove product development at DLX Technology. He was instrumental in guiding the Luxe® marker brand to the top of the industry and the podium. This marker is the last Luxe® that will have the benefit of his guidance and input, we are proud that it will carry his legacy and the TM40 moniker.AestheticsThe Luxe® TM40 is the physical definition of the Luxe® brand, clean and minimalistic yet instantly recognizable. It looks like a Luxe®, and that is a good thing because the Luxe® is the best-looking marker in paintball.ErgonomicsLuxe® ergonomics have set the industry standard since the Luxe® was introduced, and has always been based upon feedback from the top players in our sport. By adapting to playing style changes, tank, loader configurations, and trigger preferences DLX has further optimized the handling characteristics of the Luxe® TM40. Ergonomic changes to the trigger-frame, foregrip, and other contact surfaces make the Luxe® TM40 the most comfortable Luxe® we have ever produced.Refined PerformanceThe previous generation Luxe® won a World Cup in its debut year in the hands of Houston Heat. Building on that success, we strove to refine the Luxe® drivetrain to deliver even greater performance. Nearly every component of the core has been altered and redesigned to improve efficiency, shot quality, and ball handling.VersatilityWith a mechanically optimized core, the Luxe® TM40 goes where no Luxe® has gone before - mechanical. Featuring an industry-first tool-less mechanical conversion, the TM40 is ready to compete and win in nearly any competitive paintball genre.  

"CAMO MARBLE" Splash on a new Shocker® ERA The product price consists of the regular Shocker ERA price plus the graphic wrap "CAMO MARBLE" which will not happen again. An absolute unique piece We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball markerTwo-Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation.Faster Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal.Improved efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase)Twist-Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move.Ultra-gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech.Tool Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size.Improved Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter.New curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field.Slimline Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built.Compact QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.  

The all new Luxe X is the culmination of 10 years excellency. We did our own inhouse testing, listened to our loyal teams and customers, and the result is the most advanced, most reliable and most trusted Luxe out there; the all new Luxe X.The all new Luxe® bolt system is designed from the ground up to satisfy the performance expectations of any competitive player. Featuring a multi-stage core the X-Core offers a significant increase in efficiency, a reduction of maintenance and delivers the smooth shot that has defined the Luxe® series of markers. The X-Core is the largest change to the Luxe® bolt system in more than a decade - and it was worth the wait. Inspired by professional player feedback, the Pro-Lock frame allows the player to fully remove their grip-frame without tools and utilizes an uncompromising locking system to prevent accidental removal. Once again, Luxe® sets the new standard in tool-less features. The convenience and speed of tool-less has now made the leap to trigger frame design. The Freak XL is the latest generation of the world-renowned interchangeable bore barrel system. Custom milled and styled for the Luxe® X, it is the last barrel you will ever need. Players can utilize the Freak XL Boremaster Kit (sold separately) to access a wide range of bore sizes to ensure players the most consistent and accurate shot possible. By utilizing a single mounting screw and fully sealed roller bearings, the EZ-Axis trigger system simplifies adjustment and removal of the Luxe® trigger while increasing its resistance to dirt contamination. A single allen key is all that is needed to remove, adjust or install your trigger without the need to remove the frame. One of the best feeling triggers in paintball is now the simplest and most durable. The Opti-Breach System is designed around the interaction of the paintball, chamber and bolt face all working in symphony to minimize force. Low angle lever detents reduce pressure on the ball and offer incredibly long life. The vision system delivers excellent performance in extreme conditions and can be serviced without the need for tools. Finally, the open face bolt contacts the paintball on its strongest location, its outside edge, evenly distributing force as the ball travels within the breach. Designed from the ground up for maximum flow and durability, the Max-Flo regulator is also incredibly simple to service. Complete maintenance can be completed in minutes with a single tool. A redesigned regulator seat is more resistant to wear as well as being reversible for twice the life. The Max-flo is simply the highest flow, and most durable regulator ever equipped to the Luxe® platform. Roto-mount electronics set the standard for ease of use when working with the control boards in your marker. Simple quarter turn locking pins allows the player to remove all electronics from the marker without the need for tools or tiny screws. When combined with the Intelli-connect and Flex-pwr systems the Luxe® X has one of the most capable and user friendly electronic packages ever created for paintball. The Flex-Pwr battery system offers multiple charging options, a fully encased lithium cell and three times the capacity of previous Luxe® batteries. Charge inside the marker using USB-C connection or externally with optional external charger pack assures the Luxe® X can be charged from any standard USB power source. The Flex-Pwr battery system catapults the Luxe® X to the forefront of battery technology. The Inteli-connect system utilizes contact pads throughout the marker eliminating the need for wires or plugs. Each connection features gold-plated contacts, and spring loaded contact pins to assure easy alignment and industry leading corrosion resistance. All major electronic components can removed and replaced with minimal chance of handling errors, never be intimidated by electronics again. The Luxe® X bolt system retains the incredible ICE-Coating technology, world renowned for its high durability and self-lubricating properties. The ICE Friction System ensures that all moving components operate with minimal friction and very little maintenance. The extreme hardness of the ICE coating prevents scratches and damage from debris. With ICE coating technology the Luxe® X offers greater performance in a wider range of environments, with less maintenance than ever before.  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball marker Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation. Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal. efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase) Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move. gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech. Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size. Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter. curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field. Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built. QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.\par  

The new flagship from DLX Technologies is called Luxe IDOL. The variant shown here is the design version for the "JOY DIVISION" team. The design was elaborately applied to the marker using a special graphic wrap process. The core is of course the new LUXE IDOL, which - as described below - has developed tremendously. WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball markerTwo-Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation.Faster Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal.Improved efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase)Twist-Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move.Ultra-gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech.Tool Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size.Improved Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter.New curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field.Slimline Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built.Compact QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.  

"KARMA" Grapic Wrap on a new Shocker® ERA The product price consists of the regular Shocker ERA price plus the graphic wrap from the "KARMA" team. We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

"Joy Division" Advanced Lasering with barrel on a new Shocker® ERA The product price consists of the regular Shocker ERA price plus the DLX Europe LaserLab Advanced Lasering with barrel. We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

"Tri-Fade Germany" Splash on a refurbished Shocker® ERA The product price consists of the regular Shocker ERA price plus the anodizing "Tri-Fade Germany" which will not happen again. An absolute unique piece We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

Mix 'n' MatchThe marker is delivered withpreinstalled accent kit and grips.We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

"RASTA" Splash on a new Shocker® ERA The product price consists of the regular Shocker ERA price plus the graphic wrap "RASTA" which will not happen again. An absolute unique piece We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

First Strike T15 cal. 68 Magfed Marker 200bar The Tiberius Arms/First Strike cal. 68 MagFed marker has become the most popular MagFed marker. Not least the constant further development and the many conversion possibilities offer options like no other MagFed paintball marker. Many original parts from the AR15/M16 segment can be used 'out of the box'. Handguards, different barrel lengths, shoulder rests, etc.. As part of our annual inventory, we happened to discover a few treasures behind the shelf that we no longer want to withhold from you. The T15 cal. 68 MagFed paintball marker comes in two different versions, whereby we have not found any significant differences between the two versions and have therefore not added a price mark-up to the 'case' version. Only a limited quantity is available, so if it's gone then it's gone. The T15 'Case' package includes: - 1x T15 Marker Gen. 3 - 2x T15 Magazine Gen 1 (19 rounds) - 1x shoulder rest - 1x 200bar aluminium cylinder with regulator - 1 x T15 case with plastic inserts for safe transport The T15 'Box' package includes - 1x T15 marker Gen. 3 - 2x T15 Magazine Gen 1 (19 rounds) - 1x shoulder rest - 1x 200bar aluminium bottle with regulator Only available to persons over the age of 18  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball markerTwo-Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation.Faster Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal.Improved efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase)Twist-Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move.Ultra-gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech.Tool Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size.Improved Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter.New curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field.Slimline Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built.Compact QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.  

We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

From the birth of electronic paintball through the resurgence of mechanical, the Shocker® has evolved at the cutting edge of the game. The Shocker® AMP keeps this tradition moving forward with new refinements, maintaining its position as the ultra-efficient, ultra-slim and ultra-light avant-garde paintball marker Piece Board Design - With less to move and reconfigure, the Shocker® AMP is easier than ever to switch between ripping fast electro to top-end mechanical operation. Frame Removal - The distributed electronics driving the Shocker® AMP also make maintenance faster, by allowing for faster grip frame removal. efficiency - It's hard to believe, perfection could be improved upon but the engineering team behind the Shocker® found room to further upgrade its efficiency. The Shocker® AMP valve and bolt are the most efficient yet (approximately 20% increase) Lock Bolt - One quick twist de-pressurizes the Shocker® AMP and unlocks its bolt and fire chamber to slide out for quick maintenance in the pits - completely tool free access to both the bolt and valve in one move. gentle bolt - Efficiency improvements have lowered the Shocker® AMP's operating pressure from 160psi all the way down to 110psi. Whether on its own in mechanical mode, or combined with the VisionTM anti-chop system as an electro, the Shocker® AMP is more gentle on paint than ever before to make sure it breaks on target and not in the breech. Free Solenoid Valve Removal - No tools means faster maintenance. Unlock and remove the Shocker® AMP solenoid valve for cleaning without digging through all the hex wrenches in your tool bag to find the right size. Water Resistance - Paintball doesn't stop when the weather gets rough and neither does the Shocker® AMP. Better protection against moisture intrusion keeps you in the game when others falter. curves - Ergonomic upgrades to the Shocker® AMP grip give an even better feel on the field. Reg Cover - A tighter fit and look, as the Shocker® AMP moves the Shocker® legacy forward as one of the most light and slim professional level tournament markers ever built. QEV Module - Fully integrated into the bolt the QEV will insure for the fastest response and improved cycle to cycle consistency.\par  

We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The new flagship from DLX Technologies is called Luxe IDOL. The wait was long and we are close to publication, so here is a little insight into the Luxe IDOL WHAT'S CHANGED? Some of you asked what has been done to the new Luxe IDOL. Here's a quick rundown: New HD full colour 1.3" TFT LCD screen - bright enough for daylight reading and can be easily replaced without needing to replace the whole board, if damaged. Saves time & $$! 'Sit flat' ASA that opens fully flat, vents, uses only 1 o-ring, and can be rebuilt with just a pair of needle nose pliers. Made from solid stainless steel with a nitrided coating that's super tough so it won't bend from use or slide in the dirt. Metal backstrap locks in your grip without the need for tools or screws, and protects access to the battery, charging port, and tournament lock. Barrel's no longer shrouded - no space for dirt Eye covers have a new latch without punched in magnets Front grip cover is remodeled to be slimmer and more secure Feedtube lever is now rebuildable with simple tools Top jewel is now a permanent place and will never fall off All-metal contact surfaces, reworked for performance, weight, and reliablity  

GOG eNMEy Field Lightning Bundle The eNMEy is a marker from GOG Paintball (SmartParts) that is unique in the paintball world. The eNMEy is a mechanical marker (without battery) with real pneumatic function. No hammer, no impact valve, no rocker - quite simply: in the eNMEy there are no "metal-on-metal" holding points that can wear out. Combined with the tried and tested "seal forward" spool valve technology, this results in an entry-level marker that is second to none and can also be used as a rental equipment on playing fields as a robust workhorse that defies all adversities. We have put together a set here especially for playing fields with which you can create exciting and varied gaming experiences, especially in the dusk that sets in quite early in autumn, without the game day having to end prematurely. The set consists of: 10 x eNMEy markers 10 x cal.68 barrel with integrated front thread 10 x Umarex X-Tracer cal.68 4 x Tomahawk Lightning cal.68 Paint (2000 boxes) Features GOG eNMEy: - Semi-automatic, mechanical marker (no battery) - Hammer-free, pneumatic function (with solenoid valve) - Light, pneumatic trigger - Anti-chop due to low bolt pressure - Spool valve design, tournament-level performance and reliability at an entry-level price - Easy maintenance and care by removing the bolt to the rear - Max-Flo R inline regulator - Composite/aluminum construction. The threaded and pressure-bearing parts are made of solid aluminum, the housing and handle are made of weight-saving composite material - Compatible with CO2. The regulator protects the valve from pressure fluctuations caused by liquid CO2 - can be retrofitted in many ways Barrel thread: SmartParts (SP) Weight: 764g (without barrel) Length: 21.5cm (without barrel) Width: 3.8cm body (3.5cm at the feed) Height: 22.5cm (including feed and ASA) In Germany, only available to people aged 18 or over If you are interested in the export set (for games abroad), please contact us (by email or phone). eNMEy that are sold outside of Germany have the full USA properties!  

"INDIANS" Advanced Lasering with barrel on a new Shocker® ERA The Shocker® ERA in the INDIANS Fan Edition. INDIANS is the junior team of the reigning NXL European Champion team SCALP, which dominated the 2024 season at all tournament dates in an impressive team performance. The current "work tool" of the junior team of the 2024 NXL European Champion is now available in the Fan Edition. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

"SCALP" Advanced Lasering with barrel on a new Shocker® ERA The Shocker® ERA in the SCALP Fan Edition. SCALP is the reigning NXL European Champion team and has dominated the 2024 season at all tournament dates in an impressive team performance. The current "work tool" of the 2024 NXL European Champions is now available in the Fan Edition. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age  

The new flagship from DLX Technologies is called Luxe IDOL. Of course, you can see at first glance that the new Luxe IDOL has evolved. BUT WHAT HAS CHANGED? Some of you have been wondering what has been done with the new Luxe IDOL. Here's a quick overview: · New HD full-color 1.3-inch TFT LCD screen - bright enough to read in daylight and the display can be easily replaced if damaged without having to replace the entire circuit board. Saves time and money! · "Sit Flat" ASA that opens completely flat, vents, requires only one O-ring and can be reassembled with just a pair of needle-nose pliers. Made from solid stainless steel with an extra-tough nitriding coating so it won't bend during use or slip when dirty. · Metal rear grip locks into your grip without tools or screws, protecting access to the battery, charging port and tournament lock. · Barrel is no longer covered - no room for debris · Eye covers have a new latch with no stamped magnets · Front grip cover has been redesigned to be slimmer and more secure · Feedtube lever can now be rebuilt with simple tools · Top jewel now has a permanent place and will never fall off · All metal contact surfaces redesigned for more power, less weight and greater reliability Only for sale to persons aged 18 or over  

Mix 'n' MatchThe marker is delivered withpreinstalled accent kit and grips.We are proud to announce the next chapter in the outstanding SHOCKER® story. The "Shocker® ERA" With the fascinating new milling, this marker not only embodies simple elegance, but also shows an unwavering commitment to performance. The Shocker® ERA's improved ergonomics and grip texture provide greater comfort and control. A shortened back cap increases the distance between the player's eye and the back of the marker, improving visibility. The redesigned bolt offers the player unparalleled reliability, a reduced noise signature and the ability to use even smaller paintballs without any problems. Rolling back of the very small paintball is reliably prevented, which means that the Shocker® ERA adapts to modern ball trends. Its superior flow dynamics guarantees exceptional consistency even with quick sequences of shots. The improved trigger not only feels responsive, but also provides excellent trigger feel at standard settings. Redesigned frame-to-body and frame-to-ASA seals with double-sided O-ring pins eliminate the need for Loctite, reducing backlash issues. Since there are no sealing plugs in the housing, maintenance is streamlined, which minimizes leaks and makes disassembly easier, even if you want to completely re-anodize your marker, for example. The Shocker® ERA features improved eye cable retention, further simplifying maintenance and reducing downtime between games. As standard, the Shocker® ERA is equipped with a 15-inch All-American barrel. Prepare to elevate your paintball game with the Shocker® ERA and become a standout on the field with its stunning design and outstanding performance. It's time to embrace the future of paintball gaming. Shocker® ERA: - Redesigned bolt - Better fluid dynamics - Improved ergonomics - Shortened rear cap - Improved trigger - Reduced maintenance effort - Redesigned frame/ASA seals - No Loctite connections - Improved eye cable hold - 15 inch All-American barrel Only available to people over 18 years of age